Now that your home bar or man cave has its own kegerator to cool and dispense that frothy beer you love a lot, it might be smart to get familiar with a few of the important components of your kegerator. One of the most basic areas of your kegerator is definitely the keg coupler.
What the Keg Coupler Does? Consider the keg coupler as being a “key” and also the device of the keg since the “lock”. They cannot work without one another. The keg coupler connects to the valve as well as a Carbon dioxide compressed gas line. It enables the compressed air to get into the keg and drive out your beer.
Due to all of these elements working together, you receive a flawlessly chilled and delicious draft beer inside the comfort of your home.
Types of Keg Couplers – Here is where it gets a small bit more challenging. Depending on what sort of dark beer design you might have within your kegerator, you may require a different kind of coupler in order to serve it correctly.
To choose the correct coupler for your home use, you have to know the company/type of dark beer you serve, know where it had been made and/or how big keg it is actually in. It is because you can find six various kinds of keg couplers. Here is a fast rundown of the several types of industrial keg couplers.
D Coupler – Fits U.S. Sankey Keg Valves
A Coupler – Fits Most German Keg Valves
G Coupler – Suits Some European Keg Valves
M Coupler – Suits Some German Keg Valves
S Coupler – Fits Western Sankey Keg Valves
U Coupler – Suits Some European Keg Valves
In order to your dark beer to get served properly, it must have to hold the proper kind of coupler that suits the valve around the keg. The type of coupler you need depends on in which that particular beer was kegged.
As an example, the American Sankey “D” System coupler is easily the most common. It suits all household brand kegs, as well as 95Percent of American beers. If that is all you might be planning on drinking from your kegerator, then this would be the coupler you need to select.
If you have any questions as to what sort of keg coupler you will need, it might be wise to contact your neighborhood supplier, the shop from where you bought your keg or possibly even the brewery alone. For quick reference on the most famous beers, please make reference to our handy list of keg couplers necessary for various brand names of beer.
How you can Install Your Keg Coupler
To install your keg coupler to your kegerator, you have to first attach the Carbon dioxide regulator to the Carbon dioxide cylinder. Ensure that the tube is filled and the valve is shut. Then, securely set up the regulator towards the Carbon dioxide tube. Affix the gas line to the “gas out” dock on the regulator and safe set up having a clamp. Then, attach one other finish from the gasoline line to the “gas in” dock around the coupler. Next, attach the dark beer line for the liquid out port in the coupler.
Now, you are ready for connecting the coupler towards the keg. Be sure that the Carbon dioxide cylinder vale is incorporated in the “off” place and also the pull handle in the coupler is incorporated in the diagonal/top place. Discover the securing neck around the kegerator, and transform the coupler clockwise 25°. Then, grab on the handle, drive it down in to the keg device and release the handle. This may lock the coupler in ejqnby and securely attach it for the kegerator.
Using the coupler attached to the keg, slowly activate the CO2 cylinder. Around this point, you are going to hear gasoline flowing from the Carbon dioxide cylinder and regulator from the keg coupler and into the keg. Draw in the stress relief device to allow gas to vent and provide you with a precise reading through in the pressure gauge, then calibrate the regulator for the recommended helping stress to your dark beer. You are now ready to serve your personal draft dark beer.